Description
This is a new set of Type 4 2.0 liter 96mm flat top JE Pistons and Cylinders. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. This set comes with a 30.08mm Compression Height with a 22mm Pin. The smaller compression height allows you to build large stroked engines 78 to 86mm using longer rods that have the 22mm pins. It is a Slip in kit no machine work is needed.
Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.
Engine size:2000cc
Stroke:78 to 86mm
Cylinders:cast iron
Pistons:Forged JE
Compression Height:30.08mm
Valve Pocket CC:-0.9
Pin: 22mm
Set includes: 4 pistons, 4 cylinders, 4 pins, and a set of rings
Part #VW9600T4S JE
Ready to Run Option!
Our Ready to Run option takes the guesswork out of prepping your piston and cylinder set for installation!
We balance the pistons, rings, and pins within one gram, measure piston and cylinders to match tolerance as close as possible with the set and label according to cylinder (Tightest tolerance starting with #1, #2, #4 then #3), Gap piston rings for street use (message us at time of order if you want custom ring gaps) cut the flashing out of the cooling fins for proper cooling, and apply a light flat black coat of paint to the barrels to prevent rust. We lightly coat the cylinder crosshatch with oil and load the oil ring lands with our own mix of oil to aid in break in.
Reviews
There are no reviews yet.